CCTHC - PVC CEMENT

Product Identification

Product ID:PVC CEMENT
MSDS Date:06/06/1994
FSC:8040
NIIN:00N074934
MSDS Number: CCTHC

Responsible Party
QUEEN CITY PLASTICS INC
CHARLOTTE, NC 28241
US

Emergency Phone: 803-548-0685

Info Phone: 803-548-0685

Preparer: TOM LAVELY

Cage: JO436

Contractor
QUEEN CITY PLASTICS INC
410568 CHARLOTTE, NC 28241 US

Telephone: 803-548-0685

Cage: JO436

Ingredients

FURAN, TETRAHYDRO-; (TETRAHYDROFURAN) (CERCLA)

CAS: 109-99-9

RTECS: LU5950000

Fraction By Weight: 23%

OSHA PEL 200 PPM

ACGIH TLV: 200 PPM/250 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


2-BUTANONE; (METHYL ETHYL KETONE) (MEK) (SARA 313) (CERCLA)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 46%

OSHA PEL 200 PPM

ACGIH TLV: 200 PPM/300STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


CYCLOHEXANONE (CERCLA)

CAS: 108-94-1

RTECS: GW1050000

Fraction By Weight: 17%

OSHA PEL S, 50 PPM

ACGIH TLV: S, 25 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


GRAMS VOLATILE ORGANIC COMPOUND/LITER OF COATING & OF

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K


HAZARDS BECAUSE OF PROCESS USED OR END USE OF DRIED

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYE CONT:CAN CAUSE SEVERE
IRRITATION. VAPORS CAN CAUSE SLIGHT TO MODERATE IRRITATION. SKIN
CONT:CAN CAUSE MODERATE IRRITATION, DEFATTING, & DERMATITIS.
INGESTION:CAN CAUSE GASTROINTESTINAL IRRIT ATION, NAUSEA, VOMITING,
& DIARRHEA. INHALATION:CAN CAUSE NASAL AND RESPIRATORY IRRITATION,
DIZZINESS, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:WEAKNESS, FATIGUE, NAUSEA, HEADACHE,
POSSIBLE UNCONSCIOUSNESS, & EVEN ASPHYXIATION. CHRONIC:NONE LISTED
BY MANUFACTURER.
Medical Cond Aggravated by Exposure:RESPIRATORY PROBLEMS.

First Aid

First Aid:EYE:FLUSH W/WATER FOR AT LEAST 15 MINUTES. CALL PHYS IF IRRIT
OCCURS. SKIN:WASH W/SOAP & WATER. CALL PHYS IF IRRIT OCCURS.
INGEST:TO CONSCIOUS PERSON, GIVE 2 GLASSES OF WATER. DO NOT INDUCE
VOMITING A ND CALL PHYS IMMED. INHAL:MOVE PERSON TO FRESH AIR. IF
BREATHING STOPS, ADMINISTER ARTIFICIAL RESPIRATION & CALL PHYS
IMMED.

Fire Fighting

Flash Point Method:TOC
Flash Point:<20F,<-7C
Lower Limits:1.0%
Upper Limits:12.8%
Extinguishing Media:ALCOHOL FOAM, CO*2, AND DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . ELIMINATE SOURCES OF IGNITION BECAUSE VAPORS MAY TRAVEL
ALONG GROUND/BE MOVED BY VENTILATION.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. DIKE AND PUMP
LIQUID TO WASTE CONTAINERS. DISPENSE SAND, SAWDUST, OR VERMICULITE.
SHOVEL INTO CLOSED WASTE CONTAINERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE >40F OR <100F. DO NOT STORE/USE
NEAR HEAT, SPARKS, OR FLAME. STORE IN WELL VENTILATED AREA. KEEP
CLOSURE TIGHT & CNTNR UPRIGHT TO PVNT LEAKAGE.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. DRUMS OF THIS MATL
SHOULD BE GROUNDED & BONDED WHEN POURING. DO NOT PUNCTURE,
DRAG/SLIDE CNTNR. PVNT PRLNGD/RPTD BRTHG OF VAP/MIST. DO NOT
WELD/FLAME CUT AN EMPTY DRUM. RPTS HAVE ASSOC RPTD & PRLNGD
(SUPDAT)

Exposure Controls

Respiratory Protection:IF PEL OR TLV IS EXCEEDED, USE NIOSH APPROVED
RESPIRATOR.
Ventilation:USE SUFFICIENT VENTILATION, IN VOLUME & PATTERN, TO KEEP
AIR CONTAMINANT CONCENTRATION BELOW PEL OR TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:USE GOOD HYGIENIC PRACTICES. (WASH HANDS BEFORE
EATING, USING WASHROOM, OR SMOKING).
Supplemental Safety and Health
OTHER PREC:OVEREXP TO SOLVS W/PERM BRAIN & NERV SYS DMG. INTENTIONAL
MISUSE BY DELIB CONCENTRATING & INHALING CONTENTS MAY BE
HARMFUL/FATAL. THIS PROD AS SUPPLIED IS A LIQ, & THERE ARE NO DUST
HAZS FR OM POWDERS IN IT. WHEN PROD IS PROCESSED, POWDERS SHOULD BE
ENCAPSULATED. USER MUST DETERM IF THERE IS DUST (ING 5)

Chemical Properties

Boiling Pt:B.P. Text:>146F,>63C
Vapor Pres:86
Vapor Density:2.5
Spec Gravity:0.90 (WATER=1)
Evaporation Rate & Reference:NOT KNOWN
Solubility in Water:NOT KNOWN
Appearance and Odor:CLEAR LIQUID WITH KETONE ODOR.
Percent Volatiles by Volume:86(WT)

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:DECOMP PRODS:MATL MAY PRODUCE CO,
CO*2, H*2O & MATERIALS LISTED IN INGREDIENT SECTION.

Disposal

Waste Disposal Methods:DISPOSED OF IN ACCORDANCE WITH FEDERAL, STATE
AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.